Leading 10 usual forklift accidents ， forklift procedure need to pay attention to these issues ！.
Leading 10 usual forklift accidents ， forklift procedure need to pay attention to these issues ！.
Blog Article
Do not underestimate the forklift at work. If the procedure is bad, there will be serious mishaps in mins, and there are many accidents entailing forklifts.
Instance 1: The forklift freight obstructed the vehicle driver's sight, and the person ahead can not be discovered, causing a rolling mishap.
Case 2: In order to keep the equilibrium of the forklift when lifting hefty goods, the workers utilized their body weight as the weight, which nearly triggered casualties.
Case 3: The size of the forklift freight exceeds the allowable size of the course and holds on the roadside shelf, which practically triggers an accident.
Case 4: Forklift is speeding and surrender throughout a turn.
Instance 5: The forklift chauffeur did not notice the pedestrian, and the pedestrian did not notice the forklift.
Case 6: The forklift raises the workers illegally, the forklift motorist does not use the seat belt, the forklift lifter falls and the motorist is crushed when the forklift surrender.
Instance 7: The forklift chauffeur did not wear a seat belt and fell from the automobile when it surrendered and was crushed.
Forklift operation ought to take notice of these matters ：.
Start.
1. Prior to starting, observe the environments, and after verifying that there are no barriers that impede the safety of driving, beep the horn first and afterwards begin.
2. For lorries with hydraulic (air pressure) brakes, the brake hydraulic pressure (air pressure) gauge must be risk-free prior to starting.
3. When the forklift begins with a tons, the driver ought to initially confirm that the load is steady and reputable.
4. The beginning must be slow and constant.
Driving.
1. When driving, the height in between the bottom end of the fork and the ground need to be maintained 300mm-400mm, and the mast should be slanted backward. .
2. Do not raise the fork too expensive when driving. When going into and leaving the job site or while driving, be careful that there will be no obstacles overhead. When the load is traveling, the fork needs to not be increased too high, which will impact the stability of the forklift. .
3. After discharging, the fork needs to be reduced to the normal driving position prior to driving. .
4. When transforming, if there are pedestrians or lorries close by, the driving signal needs to be provided first. High-speed doglegs are banned. High-speed doglegs will create the automobile to lose side stability and tip over. .
5. When the forklift is downhill, it is purely restricted to shut off the fire and slide, and it is prohibited to brake suddenly while driving with loads unless there are unique scenarios.
6. When the forklift is running, it has to follow the traffic rules in the factory and must keep a particular safety range from the car ahead. .
7. When the forklift is running, the lots has to remain in the lowest placement that does not hinder the driving, and the gantry needs to be correctly slanted back. The tons will not be elevated other than when piling or packing. .
8. The elevation of the load should not obstruct the driver's sight. In special scenarios, when the thing impacts the forward vision, drive at a low rate when turning around.
9. It is prohibited to turn on the ramp, neither to drive throughout the ramp. .
10. The secure driving rate of the forklift in the manufacturing facility area is 5 km/h, and it has to drive securely at a reduced rate when getting in the manufacturing workshop location. .
11. When the forklift is lifted, lifted or driven, it is prohibited for workers to depend on the fork to hold things and play a stabilizing role. .
12. If problems are located, they will be fixed and reported in a prompt way, and they will certainly never operate with diseases or conceal them.
filling and unloading.
1. When fork-loading things, the range in between the two forks ought to be readjusted as required to make the lots of both forks well balanced and not manipulated, and one side of the item should protest the rack. .
2. It is restricted to collaborate with a single fork or use a Electric Forklift Truck for Warehouse fork top or draw. In special scenarios, security indication should be established to advise surrounding pedestrians. .
3. In the process of packing and unloading products, the forklift should be braked with the brake. .
4. The speed of the lorry need to be slow-moving and constant. Take care not to roll the wheels on the dunnage, so as not to extend the rolled items and injure individuals. .
5. When making use of a fork to fork the goods, the fork ought to be as deep as feasible under the lots, and it ought to be kept in mind that the fork pointer ought to not touch various other goods or things. The lots needs to be supported with marginal back tilt of the gantry to make sure that the lots does not slide backwards. The pole can be slanted onward slightly when the lots is reduced to allow for very easy placement of the lots and removal of the forks. .
6. It is prohibited to fork products at high speed and ram hard objects with the fork head. .
7. When the forklift is working, it is prohibited for people to stand around the fork, so regarding prevent the collapse of the goods and harm people. .
8. Overwhelming is restricted, and it is forbidden to use forks to raise employees to participate in high-altitude operations to stay clear of high-altitude falling accidents. .
9. It is not allowed to make use of the brake inertia to slide, place, round or roll objects. .
10. It is not allowed to use forks to pick, turn pallet discharge.
Leaving .
1. It is restricted to leave the forklift when the products on the fork are in the air. Before leaving the forklift, you must discharge the goods or reduced the fork framework.
2. Pull the hand brake take care of to dead or depress the emergency brake button.
3. The engine is turned off and the power is cut off. (Except for special conditions, such as the vehicle driver does not leave the automobile's view and does not surpass 1 min).
4. Remove the secret. .
Forklift Operation Precautions.
1. Prior to and after the forklift operation, the look needs to be checked, and fuel, lubricating oil and air conditioning water need to be added.
2. Inspect the safety performance of starting, running and stopping.
3. Examine whether the lights and horn signals are full and effective.
4. During the procedure of the forklift, examine whether the pressure and temperature are regular.
5. After the forklift is running, the outside leak needs to additionally be examined and the seals should be replaced in time.
Forklift Safety Operation Specifications.
1. You need to examine prior to leaving the automobile;.
2. When you run into somebody in front of you throughout driving, you should send a signal at a distance of 5 m;.
3. The driving rate in the factory does not exceed 5 km/h;.
4. When driving, the nadir of the freight need to be 0.3 m ~ 0.4 m in the air;.
5. The turning must not be too sharp to avoid the propensity of " complimentary turning";.
6. Adding and down the incline must be sluggish and consistent, and no switching on the incline is enabled.
7. Do not drive throughout the slope. When the gradient is greater than 10%, the lorry must be driven backwards when worsening;.
8. When the forklift workers bring the goods and move forward, if they encounter huge or heavy products and most likely to the chauffeur's line of sight, they need to take the reversing workout
.
The "Eight Prohibitions" ought to be adhered to in the procedure.
1. Single fork procedure is not permitted.
2. It is not allowed to raise the goods for long distance driving.
3. It is not enabled to grab the goods by turning over the pallet with the fork.
4. It is not enabled to straight shovel chemicals, flammables and other harmful chemicals with forks.
5. It is not permitted to use inertia force to pick up the goods.
6. It is not allowed to make use of stopping force to expatriation round or easy-to-roll things.
7. It is not enabled to bring individuals Electric Forklift Truck for Warehouse to deal with the pallet or fork, and it is strictly forbidden to stand under the fork after the fork is increased.
8. Do not drive side to side on slopes
.
Car park is not allowed under the list below conditions.
1. Curves, slim roadways, train crossings;.
2. Areas with a longitudinal incline more than 5%.
3. When there is an barrier on one side of the roadway, the contrary side of the area with the very same size as the challenge must be within 20 meters at each end.
Web：https://www.onenforklifts.com/
Email：[email protected]
Phone：+86 13827083844